SMART Board™ Interactive Whiteboard System
₨65,000₨68,000 (-4%)
On-Screen Interface Includes interactive tools for controlling the projector, making notes over projected images
and saving ScratchPad pages to a USB storage device
Projector Head Includes a focus ring and a side-mounted access door for changing the lamp
Display Type True XGA (1024 × 768) projector
Display Technology Projection engine does not require cleaning or filter replacement. The projection engine
uses DLP® technology by Texas Instruments® and features Vikuiti™ Super Close Projection
technology from 3M.
Brightness 1500 ANSI lumens, typical
Lamp Life 2000 hours (Standard mode), 3000 hours (Economy mode)
Aspect Ratio 4:3 native, with support for 16:9
Contrast Ratio 1000:1 (FO/FO) (minimum)
Video Compatibility NTSC, PAL, SECAM, Composite, S-video, Component (YPbPr/YCbCR), SDTV (480i, 576i),
EDTV (480P, 576P), HDTV (720P, 1080i), VGA, SVGA, SGA, SXGA, MAC (UXGA)
Synchronization Auto image synchronization (auto tracking, frequency, position adjustment, source detect and
phase detect)
Scanning Rate H-sync 15 kHz to 82 kHz, V-sync 50 Hz to 85 Hz
Color True color (16.7 million 24-bit colors)
Audio System Integrated stereo amplifier and speakers (20 watts per channel)
Mounting Hardware Hardware supplied for mounting the Unifi projector and the extended connection panel
to framed and concrete walls
Input/Output
Connections
DVI-I jack - analog or digital projector video input
HD-DB15 jack - RGB video from computer, linked to extended connection panel
Two 3.5 mm stereo jacks - audio inputs, one linked to extended connection panel
3.5 mm stereo jack - audio output
Mini DIN 4-pin connector - S-video input, linked to extended connection panel
RCA jack - composite video input, linked to extended connection panel
Two RCA jacks - stereo audio input, linked to extended connection panel
Three RCA jacks - component video input
Two USB A receptacles - one for USB storage device, linked to extended connection panel
- one for USB link to interactive whiteboard
USB B receptacle - computer data connection, linked to extended connection panel
DB9F - serial (RS-232) computer or external control system connection
Power reset connector - linked to extended connection panel Reset button
AC power receptacle - accepts standard IEC power cable or adapter
Projector Noise 34 dBA (Standard mode) / 32 dBA (Economy mode)
Power Requirements 100V to 240V AC 50/60 Hz, 450 W
Power Switch Master power control switch
Power Cable Three 14' 9" (4.5 m) power cables provided (U.S., UK and Europe)
External Control RS-232 input configured to accept control codes from computer or room control system
Power Consumption 450 W maximum
Remote Control Provides an alternate method of controlling the 680i system’s major features
Pen Tray Optical sensors in the pen tray detect when you lift a pen or the eraser from the tray.
LEDs show the active tool.
Pens and Eraser Black, blue, red and green pens, and a rectangular eraser
Resolution Touch resolution is approximately 4000 × 4000.
Screen Surface The hard-coated polyester surface is tear proof, optimized for projection, compatible
with dry-erase markers and easily cleaned with whiteboard cleaner.
Digitizing Technology Resistive
Frame Finish Two-tone gray (approximates Pantone® Charcoal Gray 18-0601 TPX) and Ultrasonic Chrome
(approximates metallic Pantone 877 C)
Wall-Mount Bracket 32″ (81.3 cm) wide with five screws and drywall anchors to support a wall-mounted
interactive whiteboard.
Installation
Instructions
Do not use when installing the 680i system. The installation instructions are for interactive
whiteboard installations that don’t include the Unifi projector.
Reviews
There are no reviews yet.